Jointless Works
無縫工藝
Burnt Dark
燒焦痕跡
抹刀過度，微水泥“燒焦痕跡”
"Burnt Dark' on microcement due to excessive trowel
用金屬批刀過度抹平微水泥，微水泥表面會留下燒焦痕跡，這未必符合隱約的微水泥設計要求。這種情況大多發生在微水泥的最後一層施工上，當中常因以下原因出現引致：
-
微水泥底層不夠平整
-
已超過微水泥的的可使用時間
-
批刀在該區域上塗抹的次數過多
-
批刀按壓太用力
-
批刀品質不好
Excessive troweling of an area by steel trowel will leave dark marks in microcement, which is unwanted for subtle design requirement. This often happening on last coat application of microcement if
-
the bottom layer of microcement is irregularities
-
the open-time of microcement is over
-
the applicator goes over the area too many time
-
the applicator presses the area too hard
-
the quality of steel trowel is bad
所有工序都要求不同的批刀特性，以確保精確和專業的結果。他們中的特性對每一個對於這個過程都至關重要。
All processes require the use of difference trowel to ensure precise and professional results. Every one of them is critical to the process.
底層批刀：專門為微水泥製成的批刀，用於批刮底層微水泥。它的材料使其成為比其他微水泥批刀更耐用的批刀，其硬度使其能夠很好地「批平」微水泥表面。
Base coat trowel: A trowel made specifically of microcement, used to prepare base coats. Its materials make it a far more durable trowel for microcement than others, and its hardness allows it to "smooth" the surface very well.
面層批刀：專門為微水泥製成的半彈性批刀，用於批刮面層微水泥。它的柔韌性使其能夠減少"燒焦痕跡"，保留微水泥的自然紋理。
top coat trowel: A semi-flex trowel made specifically of microcement, used to prepare top coats. Its flexible allows it to achieve finishes with less burned effect, preserving the natural texture of the microcement.
冇"燒焦痕跡"膠批刀，非常適合保持淺色乾淨清新。
Non-Burnishing Plastic Trowel. Ideal for keep light colours clean and fresh.
